View Full Version : Rear End
cobrafreak01
03-25-2005, 01:31 PM
Well today I had the day off and decided to pull the rear end out of the Cobra. The plan is to drop it off at the ring and pinion shop on Monday, and have new 31 Spline Strange Axles, 4.30 Gear and Auburn Diff installed .
Thanks goes out to SaleenOutlaw for the help today.
BigWheelinBubba
03-25-2005, 01:37 PM
Well today I had the day off and decided to pull the rear end out of the Cobra. The plan is to drop it off at the ring and pinion shop on Monday, and have new 31 Spline Strange Axles, 4.30 Gear and Auburn Diff installed .
Thanks goes out to SaleenOutlaw for the help today.
Call Drivetrain Solutions. Scott Koresky does great work and is highly recommended on other local boards. He is located in Eastpointe and can probably give you a better deal than the local shops... Also he stands behind his work.
586-630-1098
Strtracer
03-25-2005, 01:42 PM
Call Scott, he's done 2 axles for me, same parts as DTS or Ring and Pinion, but cost less. He can build anything you want.
GTrackd
03-25-2005, 01:51 PM
Scott did mine too....
Why 4.30's ???? Is'nt that kinda crazy with the blower?
357windsor
03-25-2005, 04:59 PM
Call Drivetrain Solutions. Scott Koresky does great work and is highly recommended on other local boards. He is located in Eastpointe and can probably give you a better deal than the local shops... Also he stands behind his work.
586-630-1098
Well I guess I know who'll I'll take my 8.8 to! :bna:
cobrafreak01
03-25-2005, 05:27 PM
Call Scott, he's done 2 axles for me, same parts as DTS or Ring and Pinion, but cost less. He can build anything you want.
Cool thanks guys, I might just do that instead. Does he have a shop or work out of his own place?
GTrackd
03-25-2005, 05:32 PM
he was working out of his own place, But I think he may have a shop now????
not sure......
He is on motown as 1bad86z if you wanna PM him....
Or you could just call the number bubba listed :)
BigWheelinBubba
03-25-2005, 06:12 PM
Cool thanks guys, I might just do that instead. Does he have a shop or work out of his own place?
Working out of his garage last I knew... Less overhead and lower prices ;)
doogz
03-26-2005, 11:44 AM
Scott did mine too....
Why 4.30's ???? Is'nt that kinda crazy with the blower?
It sounds like a steep gear but when your powerband starts at 3.5K, you need every bit of help getting it there. Keeps the RPMs up in between shifts, too :cool:
Scott_DriveLineSolutions
03-26-2005, 12:26 PM
Hi all, I finally regestered here and will be talking to the mods bout advertising here. Scott K.
BigWheelinBubba
03-26-2005, 01:33 PM
Hi all, I finally regestered here and will be talking to the mods bout advertising here. Scott K.
About time we got a fast car on this board ;)
doogz
03-26-2005, 04:39 PM
Hi all, I finally regestered here and will be talking to the mods bout advertising here. Scott K.
Shoot a PM to Lisa, she'll be able to take care of you. Welcome!
Scott_DriveLineSolutions
03-26-2005, 08:58 PM
I already talked to Strtracer, I know him personaly, and he said he will get in contact with her. thanks.
cobrafreak01
03-27-2005, 12:48 PM
Hi all, I finally regestered here and will be talking to the mods bout advertising here. Scott K.
Youve got mail.
ReiKo
04-01-2005, 11:07 PM
Well today I had the day off and decided to pull the rear end out of the Cobra. The plan is to drop it off at the ring and pinion shop on Monday, and have new 31 Spline Strange Axles, 4.30 Gear and Auburn Diff installed .
Thanks goes out to SaleenOutlaw for the help today.
You should of went 4:56 :P
cobrafreak01
04-05-2005, 10:30 AM
The rear is done in the Cobra and everything is great. Big thanks to Scott over at Driveline Solutions for a job well done and great turn-around time.
Now its off to Alternative for the Tune.
Hey Reiko, if the car saw more track time I might have gone 4.56. But it sees more street and 4.30's are a good compromise.
Scott_DriveLineSolutions
04-05-2005, 11:01 AM
Good to hear everything is going well, Let me know how much it makes. :cool:
Cool...let us know what it puts down. :cool:
cobrafreak01
04-07-2005, 10:47 AM
Cool...let us know what it puts down. :cool:
Just talked to Lidio and I will be dropping the car off on Tuesday for the Tune. He will need it a few days as he is pretty busy right now. But he did say that he may have it done before the weekend.
I will post with numbers once it has been tuned.
1Quick88
04-07-2005, 10:49 AM
sweet deal! keep us posted :cool:
Steve Starnes
04-07-2005, 11:13 AM
sweet deal! keep us posted :cool:
:w/:
99SVTAddict
04-07-2005, 07:58 PM
Can't wait to run into you on the street Jamie :evil:
LodderD
04-08-2005, 08:42 AM
Can't wait to run into you on the street Jamie :evil:
Won't racing be hard to do with the baby in the car :D
cobrafreak01
04-08-2005, 09:25 AM
Can't wait to run into you on the street Jamie :evil:
Yeah because that will be a really close race. F*** it, the bottle is going back on for one glory run against Chuch. I may tank the motor while kicking his ass, but it would be well worth it. :evil: :evil:
99SVTAddict
04-08-2005, 10:23 AM
:D
All in fun.
Steve Starnes
04-08-2005, 10:28 AM
When when this is done I suggest that it is put onto video!!! :naughty:
BigWheelinBubba
04-08-2005, 11:19 AM
When when this is done I suggest that it is put onto video!!! :naughty:
Don't get excited you're studdering :P
1Quick88
04-08-2005, 12:07 PM
Don't get excited you're studdering :P
:lol:
video isnt needed, we all already know that chuch cant drive :P
StangRacer
04-08-2005, 02:34 PM
:lol:
video isnt needed, we all already know that chuch cant drive :P
Not all of us know that.