View Full Version : SuperCharger pulleys (Vortech)
99SVTAddict
01-18-2005, 09:56 AM
What size pulley comes on the Vortech S-trim V2-SQ standard? Is it a 6 or 8 rib standard as well? I think it's 6 but I'm not sure.
If I want to add boost, which pulley is recommended? 2.87??
Just curious ;)
99SVTAddict
01-18-2005, 10:02 AM
In further researching, it looks like it may have a 3.60 pulley, 6-rib. However, this was listed under the standard 99 Cobra Vortech recommended blower, which is the E-trim.
So I'm not sure if it's the same with the S-trim.
If it has a 3.6 pulley now, and I wanted 3-4 more lbs of boost, which pulley?
Crazzy_Al
01-18-2005, 10:11 AM
Call Lidio...you should have the number memorized by now...
cobrafreak01
01-18-2005, 10:14 AM
Chuch, I think you have a 3.33, especially if you are making 10-13 PSI of boost. The 3.60 generally runs at a max of 8-9PSI.
I did a little research on this before and found the above info out. Hell. you might just call up Vortech and ask them, I have called their support dept before and they are pretty cool.
BTW let me know if you do have a 3.33 and are upgrading, I will take your 3.33 of your hands.
99SVTAddict
01-18-2005, 10:22 AM
Shut it Al :biggun: Oh, and it's 586-463-0010 :fu:
Freak...I think you are right. I asked Lidio and he couldn't remember what he had done as far as pulleys on my car. I will let you know if I end up doing anything. BTW, check your PM's.
Crazzy_Al
01-18-2005, 10:38 AM
Shut it Al :biggun: Oh, and it's 586-463-0010 :fu:
Freak...I think you are right. I asked Lidio and he couldn't remember what he had done as far as pulleys on my car. I will let you know if I end up doing anything. BTW, check your PM's.
:lol: :D
Call Lidio...you should have the number memorized by now...
Lid's probably on Chuch's speed dial too :lol:
99SVTAddict
01-18-2005, 01:56 PM
You got me :rolleyes:
Ok people, back to the subject.
Crazzy_Al
01-18-2005, 02:09 PM
Lid's probably on Chuch's speed dial too :lol:
HAHAHAHA My attorney is on my speed dial. :lol: :D
HAHAHAHA My attorney is on my speed dial. :lol: :D
Lol!
99SVTAddict
01-18-2005, 02:24 PM
Damn you all for taking over my thread :mad: :D
Crazzy_Al
01-18-2005, 03:05 PM
Lol!
:lol: Seriously though...he is. :lol:
BigWheelinBubba
01-18-2005, 03:16 PM
Damn you all for taking over my thread :mad: :D
Take a look over on motown muscle...thats what Al does :lol:
99SVTAddict
01-18-2005, 03:24 PM
I know...I visit that site now and again. Just never registered.
Al is a POST WHORE. :boxing:
Crazzy_Al
01-18-2005, 03:42 PM
I know...I visit that site now and again. Just never registered.
Al is a POST WHORE. :boxing:
HAHAHAHA :lol:
http://motownmuscle.com/forums/memberlist.php?&order=DESC&sort=posts&pp=30<r=
Crazzy_Al's Forum Info
Joined 09-06-2004
Total Posts 3,560 (26.48 posts per day)
:lol: :cool:
99SVTAddict
01-18-2005, 03:50 PM
You should add that little fact to your resume.... :D
Crazzy_Al
01-18-2005, 03:56 PM
You should add that little fact to your resume.... :D
I'll revise my resume later tonight. :lol:
BigWheelinBubba
01-18-2005, 04:02 PM
HAHAHAHA :lol:
http://motownmuscle.com/forums/memberlist.php?&order=DESC&sort=posts&pp=30<r=
Crazzy_Al's Forum Info
Joined 09-06-2004
Total Posts 3,560 (26.48 posts per day)
:lol: :cool:
If i could come up with as much BS as you in one day i'd be right behind ya... Oh wait... I am :D
Crazzy_Al
01-18-2005, 04:07 PM
If i could come up with as much BS as you in one day i'd be right behind ya... Oh wait... I am :D
I don't want you behind me! GET OFF ME MO!!!! :lol:
BigWheelinBubba
01-18-2005, 04:17 PM
I don't want you behind me! GET OFF ME MO!!!! :lol:
WHatsamatta Bubba behind ya makes you cringe ;)
LodderD
01-20-2005, 09:33 AM
What size pulley comes on the Vortech S-trim V2-SQ standard? Is it a 6 or 8 rib standard as well? I think it's 6 but I'm not sure.
If I want to add boost, which pulley is recommended? 2.87??
Just curious ;)
Chuck I believe I'm using a 2.73 pulley on mine making 17lbs.w/cooler, more without.
99SVTAddict
01-20-2005, 09:44 AM
Thanks Scott....
Hmmmmm. What to do? :D
LodderD
01-20-2005, 09:49 AM
Mo money :D, mo power :D
cobrafreak01
01-20-2005, 12:09 PM
Thanks Scott....
Hmmmmm. What to do? :D
Just buy the stuff already and be done with it. Then give me your 3.33 pulley :evil:
99SVTAddict
01-20-2005, 12:12 PM
Sure...no problem. I'll only charge you $300 for the pulley and your time to help me with the pulley swap.
Sound good?
I think I have someone buying those extra tires from me...so only $500 more to go. If you pay me $300, only $200 to go. See how this works :naughty: :bna:
NTIMID8
01-20-2005, 03:31 PM
3.33 is usually stock.
3.12 on the 6 rib is the sweet spot
2.95 will require a lota belt babysitting and is typically the begining to the end.
there is a 2.80, 2.73, 2.60 and of course the pully of death, the 2.50. The latter od this will require a real tensionor, 6 pack of belts even with 8/10 rib.
Prick
99SVTAddict
01-21-2005, 07:12 AM
Good info....thanks.