PDA

View Full Version : 87-93 Mustang 5.0 and 302 parts


Strtracer
01-08-2005, 07:19 PM
Please PM me if you are interested in any of the following. Everything is first come first serve, no holds unless you put a cash deposit down

All New In sealed packages:
Crane Adjustable FPR #99471-1 $99.95.……$75
BBK 190LPH Fuel Pump $129.88.…….$100

New, never installed, no packaging:

87-93 LX Front Fascia $209.95.…….$170
Fascia Support $85.…………………$70
Goodyear High miler(Blue) hoses, no upper hose, has lower ,bypass ,and 2 lengths of heater hose $50

T-5 Parts:
Cases, shafts, gears, input and output shafts, sliders, bell housing, fork,factory shifters and shifter plates( no pedal assm.),tail shafts.


T5Z- 1000 miles, bought new from D&D for $1200....$800 obo

Used:
Rt&Lft front lower contol arms with spindles(upgrade your 86 and earlier to the 87 and up brakes) $50
91 Front left fender from a GT (dark blue) excellent condition $70
4 16” Silver Pony rims. 1 has 2” of curb rash, 4 lug no centers $175
Reman 91 Alternator with under drive pulley $50
K&N filter for stock air box $20

Stock 5.0 HOEFI conversion pieces:
Upper and Lower Intake, E7TE heads, fuel rail, 60mmTB, stock Maf, air box, connectiong hoses, stock alternator, water pump and crank pulleys, water pump, 110lph pump, factory headers. No wiring harness, distributor, or computer. Stock cat H-pipe. All or parts, make offers.


Carbed 302 parts

Accel Dual Point distributor $25
1 pair of D80E heads $40

302 Longblock, rebuilt, less than 1000 miles, 1978 truck motor, set up for carb, has mechanical fuel pump. Rebuilt to stock specs. Good starting point for a mild build up, or replace your worn out motor in your driver. $400

ALL PRICES ARE OPEN TO OFFERS


Again, if you are interested, please PM me for quicker response

Strtracer
01-10-2005, 02:50 PM
Pics available

Casper302
01-11-2005, 12:36 PM
Please PM me if you are interested in any of the following. Everything is first come first serve, no holds unless you put a cash deposit down

All New In sealed packages:
HPM driveshaft loop #4000-AZ $39.00.……$25
Crane Adjustable FPR #99471-1 $99.95.……$75
BBK 190LPH Fuel Pump $129.88.…….$100
Flaming River Steering Shaft for Power rack FR1504P $174.95.….$150
Energy Suspension Steering Rack Bushings $10.95......$5.00

New, never installed, no packaging:

FMS 24LB injectors $219.88 …….$150
Moroso Battery box $96.95.……….$75
87-93 LX Front Fascia $209.95.…….$170
Fascia Support $85.…………………$70
Goodyear High miler(Blue) hoses, no upper hose, has lower ,bypass ,and 2 lengths of heater hose $50

T-5 Parts:
Cases, shafts, gears, sliders, bell housing, fork,factory shifters and shifter plates( no pedal assm.),tail shafts.

King Cobra clutch and pressure plate, 80% left, with NEW throw out and pilot bearing $100

T5Z- 1000 miles, bought new from D&D for $1200....$800 obo

Used:
Rt&Lft front lower contol arms with spindles(upgrade your 86 and earlier to the 87 and up brakes) $100pr
91 Front left fender from a GT (dark blue) excellent condition $85
4 16” Silver Pony rims. 1 has 2” of curb rash, 4 lug no centers $225
4 15” American Racing Rims, Gold center w/polished rim, 4 lug with
225/60/15 tires (off brand, 50% tread) $125
Reman 91 Alternator with under drive pulley $50
K&N filter for stock air box $25

Stock 5.0 HOEFI conversion pieces:
Upper and Lower Intake, E7TE heads, 19LB injectors, fuel rail, 60mmTB, stock Maf, air box, connectiong hoses, stock alternator, water pump and crank pulleys, water pump, 110lph pump, factory headers. No wiring harness, distributor, or computer. Stock cat H-pipe. All or parts, make offers.


Carbed 302 parts
Edelbrock Performer Intake #2121 $75
Holley 600 CFM Carb W/electric choke $75
Edelbrock Signature 14”x2.5” Chrome Air cleaner $25
Accel Dual Point distributor $25
Rebuilt 302(1978) long block w/less than 1000 miles $450
1 pair of D80E heads $40


Again, if you are interested, please PM me for quicker response


Mike, I will take that clutch and plate. Send me your info and how much shipping will be. Money will be sent friday morning. As you could understand with every thing that's going on :(

bmxrider_03@hotmail.com

Strtracer
01-11-2005, 01:37 PM
Check your email Randy.

Strtracer
01-11-2005, 02:50 PM
Had some requests for pics, here they are
http://memimage.cardomain.net/member_images/2/web/554000-554999/554816_83_full.jpg

Strtracer
01-12-2005, 08:01 PM
sold

Joe5.0
01-12-2005, 10:53 PM
Will the DS loop fit a SN95? I think the floorpans are the same, not sure tho.

Strtracer
01-12-2005, 11:27 PM
Will the DS loop fit a SN95? I think the floorpans are the same, not sure tho.

Tag on box says 79-96.

Strtracer
02-11-2005, 07:17 PM
Insulating my garage, need this stuff out of my way, reasonable offers????

Strtracer
02-28-2005, 03:45 PM
Updated the ad