Strtracer
07-07-2005, 01:37 PM
Off work, no income again, so my good 455 parts are forsale
1 pair of Edelbrock Performer heads, ported, polished, cc'd to 66cc's. Porting done by local Olds engine builder/machinist.(Flow sheet available) Intake 278cfm at .600,exhaust 210cfm at .600. Erson double springs with dampners, good for .600 lift. 3/8 studs with adjustable 3/8 guide plates. Harland Sharp roller rockers with Poly locks. 7/16's ARP head bolts. Less than 1 hour of run time on all components, no drag passes or street miles....$2000 firm
Hooker SuperComps #3202 1 7/8 primary with 3 1/2 collector,O2 bung in rt header, fit 68-72 A body(plus others) Ceramic coated, cost $650 two years ago...$400
455 Crank cores, one nodular $65, one cast iron $50, both have flexplate attached.
Moroso tall Chrome valve covers for all Olds, need polishing...$40
PM me if interested
1 pair of Edelbrock Performer heads, ported, polished, cc'd to 66cc's. Porting done by local Olds engine builder/machinist.(Flow sheet available) Intake 278cfm at .600,exhaust 210cfm at .600. Erson double springs with dampners, good for .600 lift. 3/8 studs with adjustable 3/8 guide plates. Harland Sharp roller rockers with Poly locks. 7/16's ARP head bolts. Less than 1 hour of run time on all components, no drag passes or street miles....$2000 firm
Hooker SuperComps #3202 1 7/8 primary with 3 1/2 collector,O2 bung in rt header, fit 68-72 A body(plus others) Ceramic coated, cost $650 two years ago...$400
455 Crank cores, one nodular $65, one cast iron $50, both have flexplate attached.
Moroso tall Chrome valve covers for all Olds, need polishing...$40
PM me if interested